To measure is to know, to control is better
With the TechGrow Clima Control you have a digitally controlled climate controller with the possibility of controlling 2 fans (extractors). You can read the current values at a glance on the digital display and, depending on the connected sensor, TechGrow Clima Control can measure the values and register the min/max values of CO2, temperature and humidity.
Thanks to the modern software, this device can regulate the temperature and humidity in your room very accurately; the day and night values can be set separately; in addition, you can set a delay time for switching between day and night mode.
This climate controller makes operating and setting very easy, also this controller has a unique calibration function that allows you to adjust the fans (extractors) in a perfect way and you can run the fans in a manual or automatic mode. When used with other measuring equipment, there is a possibility to make the temperature measurements run parallel, this can be done with the handy 'temp offset function'.
Properties
- The Clima Control can measure and display the actual values of connected CO2, humidity and temperature sensors, record the minimum/maximum values and control values (Temp & RH).
- Day and night temperature can be set separately.
- Humidity value separately adjustable for day and night.
- Delay time for switching between day and night mode.
- Indication LEDs turn on at light detection and stable climate.
- All settings are retained in the event of a power failure.
- Displays the minimum/maximum values of connected sensors in the display.
- The display is refreshed every second.
- The fan can be controlled automatically or manually.
- Fan control is adjustable in 2% increments.
- Unique function that allows the fan to be adjusted in 2 easy steps.
- Calibration menu to adjust each box, regardless of size.
- Automatic switch-off of the display backlight after 60 seconds.
- Automatic detection of cable break or poor contact with the connected sensors.
- Connection of the sensors with standard network cable (UTP, 3 ports).
- Available in the following versions: 7A and 14A.
- Can be connected to many TechGrow devices.
- Various sensors are available separately.
- Possibility to connect the TechGrow Datalogger (DL-1).
Specifications
- Controls: Temperature/humidity
- Displays: Temperature/humidity & CO2
- Day/night detection: Yes
- Light sensor: In sensor
- Heating relay: No
- Temperature alarm: No
- Temp range: 10.0 to 45.0 C.
- Temp hysteresis: 0.0 to 5.0 C.
- RH range: 10 - 100%
- RH hysteresis: 0-30%
- Temperature settings: Day & night
- Humidity settings: Day & night
- Day/night delay: Yes
- Min/max values: Yes (Temp & RH)
- Power supply 100v - 240v
- Internal consumption 3 watts
- Fuse 8 Amp / 15 Amp
- Triac 12 Amp / 24 Amp
- Power cord 3 x 1.5mm / 1.7m
- Recommended Sensor: Temp/RH.
- Compatible Sensor: Temp/RH & S-4.
